Nikkel legeringen buis

HASTELLOY C276 Seamless and welded nickel alloy steel tube Type: Nickel alloy steel pipes Application: Equipment for flue-gas desulfurisation plants, Organic chloride process equipment Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Chemical Requirements C276 Ni Cr Mn Mo C Si Fe Max % Bal. 16.5 1.0 17.0 0.010 0.08 7.0 Min % 14.5 15.0 4.0 Mechanical proporties: C276 Ultimate Tensile Yield Strength

Inconel 600 Seamless and welded Nickel Alloy Steel Tube water tubing Type: Nickel alloy steel pipes Application: For Barge and tank truck liners, Carburizing atmospheres, Ethylene dichloride crackers Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Item 600 601 617 625 690 718 X750 825 C ≤0.15 ≤0.1 0.05-0.15 ≤0.08 ≤0.05 ≤0.08 ≤0.08 ≤0.05 Mn ≤1 ≤1.5 ≤0.5 ≤0.35 ≤0.5 ≤0.35 ≤1 ≤1 Fe 6-10 rest ≤3 rest 7

Inconel 625 Seamless and welded Nickel Alloy Steel Tube water tubing Type: Nickel alloy steel pipes Application: For Seawater components, Flare stacks, Aircraft ducting systems Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Grade (UNS) C Si Mn P S Cr Ni Mo Al Other N06625 0.1 0.50 0.50 0.015 0.015 20.0-23.0 Bal. 8.0-10.0 0.4 Ti≤0.40; Nb:3.15-4.15 Mechanical proporties: Finish Condition Yield

UNS N06625 Seamless and welded Nickel Alloy Steel Tube Type: Nickel alloy steel pipes Application: For Seawater components, Flare stacks, Aircraft ducting systems Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: Grade (UNS) C Si Mn P S Cr Ni Mo Al Other N06625 0.1 0.50 0.50 0.015 0.015 20.0-23.0 Bal. 8.0-10.0 0.4 Ti≤0.40; Nb:3.15-4.15 Mechanical proporties: Finish Condition Yield Strength (Ksi/Mpa)

NICKEL UNS N06625 INCONEL 625 ALLOY PIPE,SEAMLESS PIPE 625 Parameters Specification Type Inconel 690 Chemical Composition Ni:Rest,Cr:31% Max continue operating temp.(°C) 1377 Density at 20 °C (g/cm3) 8.19 Elongation % 45 Min tensile strength in N/mm2 700 Referenced ASTM Standard: B166 Specification for Nickel-Chromium-Iron Alloy (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, N06696), Nickel-Chromium-Cobalt-Molybdeum Alloy (UNS N06617) and Nickel-Iron-Chromiun

ASTM B423 INCOLOY 825 UNS N08825 NICKEL ALLOY SEAMLESS PIPE / TUBE Incoloy 800H/HT with close control of the carbon, aluminium and titanium contents combined with the high temperature anneal, 800H/AT has significantly higher creep-stress rupture strength than 800. Its higher nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High chromium content made it better resistance to pitting and crevice corrosion cracking

NICKEL ALLOY HASTELLOY X C-276 2.4819 C22/C4 SEAMLESS PIPE TUBE Nickel Alloy Sheet Width1000mm, 1219mm, 1250mm, 1500mm,or as customer's requestLength2000mm,2438mm,3000mm,6000mm,or as as customer's request Nickel Alloy Pipe Thickness 0.5mm-30mm as your requestSize 8mm-530mm as your requestLength 1 meters to 6 meters or as customer 's requirement Nickel Alloy Bar Diameter 2mm to 400 mm or 1/8” to 15” or as customer 's requirementLength 1 meters to 6 meters or as customer 's

NICKEL ALLOY STEEL INCOLOY 800 INCOLOY 800H INCOLOY 800HT TUBE / PIPE Incoloy 800/800H/HT is a kind of austenitic superalloy which is widely used in high temperature pressure-bearing structural parts. Incoloy 800/800H/HT has good corrosion resistance to nitric acid and organic acid, and it also has good corrosion resistance in the mixture of water, vapor, steam, air and carbon dioxide Technique Hot Rolled and Cold Rolled Type Plate,Coil,Strip Thickness Hot rolled:0.3mm to 3mm

INCONEL 601 600 625 INCONEL600 INCONEL601 INCONEL625 UNS NO6601 NO6625 NO6600 NICKEL ALLOY SEAMLESS PIPE Item Description Basic Information Material Grade Alloy 800 / 800H / 800HT, Alloy 625/UNS N06625, Alloy 600/UNS N06600, Alloy601/UNS N06601, Alloy 800/UNS N08800, Alloy 825/UNS N08825, Alloy400/UNS N04400; etc Outer Diameter 3.18mm-101.60mm Wall Thickness 0.50mm-20.00mm Length Normally fixed length 6m, can as per customer’s requirement Standard ASTM B163; ASTM B167; ASTM