precision pipes and tubes
"
Koudgetrokken/walste de Naadloze Buis 34CrMo4 42CrMo4 42CrMo van het Legeringsstaal koud
34CrMo4 42CrMo4 42CrMo Seamless Cold Drawn/Cold Rolled steel tube 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25 Main Characteristics: No Oxidation Layer on the Outer and Inner Walls No Crack under Flaring and Flattening No Leakage under High Pressure No Distortion
Naadloos Gelast Speciaal Rechthoekig de Vorm Roestvrij Materiaal 304 316 van de Staalpijp
Products Description: 304 316 Seamless Welded Stainless Rectangular Steel Pipe Square Tube Steel Grade/Steel Material: Mechanical Requirement Grade: TP304 TP304L TP304LN TP316 TP316L TP316LN TP316LN TPXM-29 TP304N UNS S30400 S30403 S30453 S31600 S31603 S31653 S31653 S24000 S30451 C, max 0.08 0.035 0.035 0.080 0.035 0.035 0.035 0.08 0.080 Mn, max 2.00 2.00 2.00 2.00 2.00 2.00 2.00 11.5-14.5 2.00 P, max 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.060 0.045 S, max 0.030 0.030 0
Ferritic/Martensitic Opgepoetst Roestvrij staalbuizenstelsel Naadloze Astm A268
ASTM A268 Seamless Ferritic and Martensitic Stainless Steel Tube ASTM A268 Seamless Ferritic and Martensitic Stainless Steel Tube Standard: ASTM/ASME A/SA 268 Material: TP405,TP410,TP409,TP410S,TP430,TP430Ti,TP444,TP446-1,446-2 Nominal Dia: 1/2 "to 8" NB for seamless pipe Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 Size Range for tube/tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5m
Super van de de Pijpprecipitatie van het Legeringsstaal Verhardende Legering 41 voor Motorcomponenten
Super Alloy Steel Pipe Precipitation Hardening Alloy 41 For Engine Components Alloy Steel Pipe Alloy 41 precipitation hardening Nickel-Base Superalloy Alloy41 is a precipitation hardening Nickel-Base Superalloy, and it has higher tensile and lasting creep strength and good oxidation resistance within the temperature range of 650~950℃. Since the alloy of aluminum, titanium, molybdenum content is high, the ingot blooming is more difficult, but the material after deformation has
Het gelaste Nikkel van de Pijphastelloy van het Legeringsstaal C276 - Chromium - Molybdeen 8.9 g/cm3
Alloy Steel Pipe Hastelloy C-276 nickel-chromium-molybdenum alloy Welded steel pipe Hastelloy C-276 is a nickel-chromium-molybdenum alloy containing tungsten content of silicon, carbon is very low. Standard of Hastelloy C-276: ASTM B462,STM B564, ASTM B575 and so on Hastelloy C-276 is characterized by: ● In the oxidation and reduction status, for most corrosive medium has excellent corrosion resistance. ● excellent resistance to pitting, crevice corrosion and stress corrosion
Het Staalnaadloze buizen op hoge temperatuur van de Milieu'slegering ASTM B674, STM B619
Alloy Steel Pipe Hastelloy C-4 Hastelloy C-4 Application: Hastelloy C-4 has been widely used in most of the chemical industry and high-temperature environments. Typical fields of application: ● flue gas desulfurization system ● pickling and acid regeneration plant ● production of acetic acid and agrochemicals ● production of titanium dioxide (chloride method) ● electrolytic plating The corrosion resistance of Hastelloy C-4: Higher molybdenum and chromium content make
ASTM A519 AISI 4130 Buis van het de Buis14x4 14x4.5 Koudgetrokken Staal van het Legeringsstaal de Naadloze Ronde
ASTM A519 AISI 4130 Alloy Steel Seamless Round Tube 14x4 14x4.5 Cold Drawn Steel Tube 4130 Steel Introduce AISI or SAE 4130 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. The steel has good strength and toughness, weldability and machinability. AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength. It shows good overall combinations of strength, toughness. and fatigue strength. 4130
Koudgetrokken Naadloze het Staalbuis 14x3mm van DIN2391 St35 NBK voor Industrie van Techniekmachines
DIN2391 St35 NBK Cold Drawn Seamless Steel Tube 14x3mm for Engineering Machinery Industry 1.Quick Details: Standard: DIN2391 Material: St35, St45, St55, St52, St35.2, St45.2, St55.2, St52.2, etc. Technology: Seamless cold drawn / Seamless cold rolled Size Range: O.D.: 16 - 168 mm W.T.: 1 - 23 mm Length: Max 12000 mm Application: for Auto Industry, machinery use, oil cylinder tube, motorcycle shock reducer steel tubes, Auto shock reducer inner cyclinder, etc. 2.Surface
Zware wand koolstofstalen koudgetrokken naadloze buis voor mechanische apparatuur
Heavy-Wall Carbon Steel Cold-Drawn Seamless Tube for Mechanical Equipment 1. Material This product is heavy-wall, cold-drawn, seamless tubing crafted from carbon steel (typically ASTM A519 1018/1026 or SAE 1541), delivering superior dimensional tolerance, surface finish, and strength—ideal for demanding mechanical applications. Cold drawing enhances physical properties versus hot-finished tubing. 2. Specifications Shape: Round seamless tube Wall Type: Heavy-wall Process: Cold
