low carbon steel tube
"
Ronde ASTM een 556 TORICH Koolstofnaadloze buis
ASTM A 556 Seamless Cold-Drawn Carbon Steel Tubes In Tubular Feed Water Heaters This standard is issued under the fixed designation A556/A556M；the number immediately following the designation indicate the year of original adoption or,in the case of revision,the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon indicates an editorial change since the last revision or reapproval. Scope This specification covers minimum
ASTM B626 Alloy 31 Nickel Alloy Gesolde Pipe N08031 Nickel-Cobalt Alloy Tube Voor de industrie
ASTM B626 Nickel-Cobalt Alloy Tube For Industry Material Specification ASTM B626 covers welded nickel and nickel-cobalt alloy tubes intended for general corrosion-resisting and low- or high-temperature service. The specification includes several UNS designations, each representing a unique alloy with distinct properties suitable for various industrial applications. Key Features Corrosion Resistance: These alloys offer excellent resistance to a wide range of corrosive
Van het Staalinconel van ASTM B163Stainless de Buis Monel400, Nicu30Fe Incoloy 825 Buis
ASTM B163 Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Steel tubes for Heat Exchangers and Condensors Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement U- Tubes available "Nickel UNS N02200, Low-carbon Nickel UNS N02201, Nickel-copper alloy UNS N04400 (Monel400,Nicu30Fe), Nickel-chromium-iron alloy UNS N06600 (Inconel600), Nickel-chromium-iron alloy UNS N06601, Nickel
C10200 de Koudgetrokken Buis van de de Pijp Lage Vin van het Legeringsstaal voor Boiler en Hitteuitwisseling
Products Description TORICH C10200 Cold Drawn Seamless Copper Low Fin Tube for Boiler and Heat Exchanger Material C10200, C11000 Etc Size Fin Thickness: 0.1-2mm; Tube OD: 8-55mm; Length: max 12m Fin Pitch Customize Surface Copper Coated End protector Plain End / Beveled End Application Oil&Gas Well Drilling, For Heat Exchanger Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test Quick Detail: Low Finned Tubes
De ronde Koper Met een laag bedekte van de Pijpiow van het Legeringsstaal Finned Buis van TORICH
Round Copper Coated Alloy Steel Pipe Iow Finned Tube from TORICH PRODUCT DESCRIPTION: Keyword: Copper Low Fin Tube Material: C10200, C11000 Etc Fin Thickness: 0.1mm - 2mm Tube OD: 8mm - 55mm Length: max 12m Application: For Boiler And Heat Exchanger End Protector: Plain End / Beveled End Surface: Copper Coated Test and Inspection: Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test etc QUALITY CONTROL: Incoming Raw
Buizen van de Torichastm A556 Gr. A2 B2 C2 de Naadloze Boiler
Torich ASTM A556 Seamless Cold Drawn Seamless Boiler Pipe This standard is issued under the fixed designation A556/A556M；the number immediately following the designation indicate the year of original adoption or,in the case of revision,the year of last revision. A number in parentheses indicates the year of last reapproval.A superscript epsilon indicates an editorial change since the last revision or reapproval. Reference documents:A450/A450M Specification for General
DIN 2463 1.4301 Austenitische roestvrijstalen buizen Geweld roestvrijstalen buizen voor algemeen gebruik
DIN 2463 1.4301 X5CrNi18-9 Austenitic Stainless Steel Pipe Welded Stainless Steel Pipes for General Purpose Material DIN 2463 1.4301, commonly known as X5CrNi18-9, is an austenitic stainless steel that is widely used in various applications due to its excellent corrosion resistance, good weldability, and formability. This grade is particularly suitable for welded pipes used in general-purpose applications. Specification The specification for DIN 2463 outlines the requirements
Zwaar Koude Gewerkte Roestvrij staal Gelaste Pijp, Austenitic Ss Naadloze buis
TP304H,TP309H TP310S,Seamless,Weled,and Heavily Cold Worked Austenitic Stainless Steel Pipes Size range: O.D.: 10-7620mm W.T.:1-13mm L:1000-12000mm Applications: Automobile, Machinery Engineering, Autoparts etc. Chemical composition(%,max) ASTMA312 Small Diameter Austenitic Seamless Stainless Steel Tube Steel Grade C≤ Mn≤ P≤ S≤ Si≤ Ni Cr Mo N s31803 0.030 2.0 0.030 0.020 1.0 4.50-6.50 21.0-23.0 2.50-3.50 0.08-0.20 s31500 0.030 1.2-2.0 0.030 0.030 1.40-2.00 4.25-5.25 18.0-19.0
Elliptisch Gelast Ovaal Roestvrij Buizenstelsel voor Aardolie en Chemische Industrie
Q235 25*10mm oval steel tubing Elliptical Welded Special Steel Pipe Standard: ASTM A179, ASTM A53, ASTM789 etc. Material: carbon steel and Stainless steel Type: Welded pipe and Seamless pipe Shape: Flat oval and oval Sizes: OD: 8~100mm*6~70mm WT: 1m~8.0mm Application: Steel Elliptical Pipe applies to Petroleum & chemical industries, construction field, machinery and hardware fields, food processing and medical industry, high or low temperature resistant, electricity
