alloy steel tube
"
JIS G3466 Standaard vierkante stalen buis van koolstofstaal met STKR400- en STKR490-kwaliteiten in afmetingen van 20 × 20 mm tot 350 × 350 mm
JIS G3466 Carbon Steel Square Steel Tube For General Structural Purposes Product Overview JIS G3466 carbon steel square steel tube is a cold-formed or formed structural hollow section used for general civil engineering, architectural, and fabricated steel structures. Under JIS G3466, the standard grade symbols are STKR400 and STKR490; STKR400 is selected for general structural frames, while STKR490 is used when higher yield and tensile strength are required. The tube is
EN 10025-2 S235JR Structurele stalen buizen, warmgewalst, niet-gelegeerd, structuurbuizen van staal
EN 10025-2 S235JR S235J0 S235J2 S275JR S275J0 Structural Steel Pipe Introduction EN 10025-2 is a European standard that specifies the technical delivery conditions for hot-rolled non-alloy structural steel products. This standard covers various grades of structural steel, including S235JR, S235J0, S235J2, S275JR, and S275J0, which are widely used in construction and engineering applications. Material Specification The structural steel grades specified in EN 10025-2 are
ASTM A249 laste Austenitic 1/4 Roestvrij staalbuis voor Boilers/Warmtewisselaar
ASTM A249 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat Exchanger, Condenser Tubes Size: OD: 1/8 in (3.2mm) to 5 in (127mm) WT: 0.015 to 0.320 in (0.4 to 8.1mm) Grade: TP304H, TP309H, TP310H, TP316H, TP312H, TP347H and TP348H. TP304, TP309S, TP310S, TP310Cb, TP316, TP321, TP347, TP348 For high-temperature service such as for superheaters and reheaters Application: Boiler, Superheater, Heat Exchanger, Condensor Tubes Austenitic stainless steel,
Austenitic Heldere Ontharde het Roestvrije staalbuis van ASTM A249 voor Boilers
ASTM A249 Standard Specification for Welded Austenitc Steel Boiler, Superheater, Heat Exhchanger, Condensor Tubes Size: OD: 1/8 in (3.2mm) to 5 in (127mm) WT: 0.015 to 0.320 in (0.4 to 8.1mm) Grade: TP304H, TP309H, TP310H, TP316H, TP312H, TP347H and TP348H. TP304, TP309S, TP310S, TP310Cb, TP316, TP321, TP347, TP348 For high-temperature service such as for superheaters and reheters Application: Boiler, Superheater, Heat Exhchanger, Condensor Tubes Austenitic stainless steel,
Buis van het de Koolstof de Mangaan Gelaste Staal van ASTM A178/A178M voor Boiler/Oververhitter
ASTM A178/ A178M Carbon Manganese Welded Steel Tube For Boiler / Superheater Applications: for Boilers,Superheaters, Heat-Exchangers, Condensers, Boiler flues, superheater flues and e ends Material: Carbon Steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.:6-127mm W.T.:0.9-9.1mm L: according to customer requirement Steel Grade and Chemical Compositions: Element Grade A, Low-Carbon Steel Grade C, Medium-Carbon Steel Grade D, Carbon
Koudgetrokken Buis van het Legerings Naadloze Staal 1 - 12m met Aisi 4130 Staalkwaliteit
Cold Drawn Alloy Seamless Steel Pipe with AISI 4130 Steel Grade ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Annealed AISI4130 AISI4140 Cold Drawn Alloy Steel
Het warmgewalste Staal van de de Bar/S45C SAE1045 CK45 Legering van C45 Ronde om Bars
Hot Rolled C45 Round Bar S45C SAE1045 CK45 Steel Alloy Steel Round Bars Material and Grade AISI: D2, D3, D6, D7, A2, A6, A8, A10, H10, H11, H13, H21, S1, S5, S7, O1, O6; DIN: 1.2080, 1.2316, 1.2343, 1.2344, 1.2379, 1.2510, 1.2601, 1.2713, 1.2714, 1.2767, 1.2842; JIS: SKD1, SKD11, SKD61, DC53; GB: Cr12, Cr12MoV, Cr12Mo1V1, 6CrW2Si, 4Cr5MoSiV, 4Cr5MoSiV1, 3Cr2W8V. Material Grade Material Grade 8#-10# φ16-290 65Mn φ40-300 15# φ14-150 45Mn2 φ18-75 20# φ8-480 60Si2Mn φ16-150 35#
Vervaardigde het Staal Uitgedreven Profielen van de Aluminium Speciale Legering voor Algemene Techniek
GB/T 6892 Wrought aluminium and aluminium alloys extruded profiles for general engineering Product Description 1.Reference Standard ASTM B241, ASTM B209-04, B210M-05, B234M-04, B221M-05a, AISI, SUS, EN573-3-2003, JISH4000-2006, H4080-2006 etc 2. Grade 6063 6061 6060 6005 6082 1070 1060 7010 3.Size Outer Diameter: max 200mm, Length: Max 7m 4. Tolerance Generally according to GB/6892, Special requirement ±0.05 5. Production method Hot Extrusion 6. Production process Aluminum
Het Buizenstelsel Vlotte Oppervlakte van het A519a369 ST35 ST52 Ovale Staal voor Werktuigbouw
A519 A369 ST35 ST52 Oval Steel Tubing Smooth Surface For Mechanical Engineering Product Description QUICK DETAILS: Produce Name: TORICH A53 - A369 ST35 - ST52 Elliprtical Steel Pipes Oval Special Steel Pipe Oval Special Steel Tube are produced with Material: 10#-45# A53-A369, ST35-ST52, Q195, Q235 , Q345 The sizes of Flat sided Oval Special Steel Tube are as follow: Outer Diameter:5-420mm (Diameter and wall thickness could be at customer's request.) Thickness: 0.5-50mm
